Wire Harness

GrtDanes said:
Which would be the best way for me to replace me wire harness in my 80 vette,from engine side of block?
Click to expand...

1991fuse.png

the questions not really clear, could you give some more details?

btw
theres alot of good related info on these sites

http://www.painlessperformance.com/wiring.php

http://www.superchevy.com/technical/int ... index.html

http://www.circletrack.com/tipstricks/7 ... index.html

http://www.hotrodscustomstuff.com/SRwiring.html

http://www.automedia.com/Muscle_Car_Rew ... 020801mw/1

http://www.lbthosting.com/dutton/others/ReWire.pdf

http://www.valvoline.com/car-care/autom ... 20020801mw

http://www.inglesemarketing.com/linked/ ... advert.pdf

viewtopic.php?f=62&t=1469&hilit=+gauges
 
Last edited by a moderator:
My clutch and flywheel exploded and sliced up my wiring harness bad.Need to replace the wiring for the engine and wipers from the main fuse block.
 
If you have a factory shop manual the wiring harness color codes and routing info is in the electrical section,if you want to piece it out, ID suggest heat shrink insulation tubing and soldering the connections

these guys sell color wire diagrams
http://www.alldatadiy.com/?gclid=CNz1-K ... 2godIHVxaw

viewtopic.php?f=70&t=1443

personally ID give a lot of thought to new wire, fuse blocks ETC. in an older car

http://www.inglesemarketing.com/linked/ ... advert.pdf

ID also suggest a SFI flywheel,clutch and a lakewood bell housing as you found out a clutch explosion could cost you your FEET!

viewtopic.php?f=71&t=584&p=757&hilit=lakewood%E2%80%A6#p757

viewtopic.php?f=71&t=447
 
You must log in or register to reply here.
Back
Top