Aluminum tubing for fuel lines

[DorianL]

That's a good thing. I reeeeeeally don't like aluminum tubing at all.

 

[legerwn]

I've been looking through my options of SS non-welded tubing,

We use a large amount of this at work for instrumentation along with compression fittings and its very durable.

Looking at McMaster Carr you can get the thin wall tubing in short sections for a some what reasonable price,

I may start looking around here to see if I can locate a local dealer,

Neal

 

[Indycars]

How much is it McMaster Carr???

The best I've found is actually on Amazon. This product is annealed to a B90 Maximum Hardness

http://www.amazon.com/dp/B007O2NHRU/ref ... xHash=true



Then there is this 316/316L SS Tubing Coil - 1/2" OD x 50 foot for $77.
http://www.amazon.com/316-316L-Tubing-C ... eel+tubing

Bright Annealed
Max Working Pressure - 1337 psi @ 72 DF
Temperature Range: -423 - 1500 DF
Tensile Strength PSI: 90504
Spec: ASTM A240/A240-08 & ASTM A269-08
Wall Thickness: 0.020 Inches

 

[legerwn]

1 foot 3 foot 6 foot

1/2" 0.02" 0.46" 1,300 89895K441 $11.61 89895K144 $21.67 89895K72 $38.70
1/2" 0.028" 0.444" 1,700 89895K245 9.15 89895K145 17.08 89895K73 30.50
1/2" 0.035" 0.43" 2,300 89895K246 10.18 89895K146 17.06 89895K29 29.93
1/2" 0.049" 0.402" 3,200 89895K247 9.94 89895K147 18.90 89895K15 33.15
1/2" 0.065" 0.37" 4,300 89895K298 10.11 89895K148 22.65 89895K32 40.45
1/2" 0.083" 0.334" 5,500 89895K249 15.61 89895K149 33.72 89895K51 62.44
1/2" 0.12" 0.26" 8,000 89895K251 17.48 89895K151 39.32 89895K52 72.82

hope this works out

Neal