Andy Durrett
Member
Hello guys. I’m new to the forum, but I have been reading lots of good information from it for years. I am in the process of building a 496 stroker for my 1976 lwb c10. I am using a 2 bolt block with studs, mildly ported 781 heads, and a used lunati flat tappet (pn#40207). I am going to use a lunati voodoo 4340 crank, eagle fsi rods, and icon forged pistons (pn#9952). I will also be using a Holley 850 DP (pn#4781), edelbrock air gap, hooker super comp 2-1/8 headers, and a modified OEM HEI distributor with an MSD 6al-BTM. I am expecting at least 10:1 compression for use of pump gas. This is my first engine build and I am on a pretty tight budget. I got the block, heads, cam, carb, and headers for free. Let me know what you guys think, and please give me any advice that you think will help. Thanks