larrym
Member
so it begins........
Motors out and partially tore down done need a puller then I can get the front cover off, it was time!
Pulled one rod bearing no copper, hope I can get away with a polish only on the crank machine shop will assess once I drop it off.
Here are some pics.
http://photoshare.shaw.ca/messages/view ... page/1/15/
Motors out and partially tore down done need a puller then I can get the front cover off, it was time!
Pulled one rod bearing no copper, hope I can get away with a polish only on the crank machine shop will assess once I drop it off.
Here are some pics.
http://photoshare.shaw.ca/messages/view ... page/1/15/