tune your engine with lap top computer or I-pad

I am not gonna opt either but will be happy knowing that my $150 on lifters is well spent then just cheaping out and buying the cam kit from lunati which comes with their cheap lifters. I saw they have similar lifters with an oil hole in the center or offset but more money. I would have gone with a crower camshaft but there was a 20hp difference in the low and mid rpms where the lunati shined. I think it was one of Harold Brookshire's designs. I have diamond paste I use to micropolish my airbrush needles it is equalivlent to 200,000 grit sand paper.
 
Strictly Attitude said:
I am not gonna opt either but will be happy knowing that my $150 on lifters is well spent then just cheaping out and buying the cam kit from lunati which comes with their cheap lifters. I saw they have similar lifters with an oil hole in the center or offset but more money. I would have gone with a crower camshaft but there was a 20hp difference in the low and mid rpms where the lunati shined. I think it was one of Harold Brookshire's designs. I have diamond paste I use to micropolish my airbrush needles it is equalivlent to 200,000 grit sand paper.
Click to expand...
Its too bad We All Don't have an Engine Dyno to use.
Everyone has the Best Cams. Claimed.
So Far Isky & Crower I have found best.
True Racers that win often use Isky Cams.
It has been impossible to convince any online.

Other than one Friend in California. Ron.
1968 El Camino. 406ci Ported his own heads.
Over 600 flywheel HP on pump gas 93 normally aspirated.
 
Another Big problem is No One Drag Races at the Track & has Verifiable ET's & MPH Timeslips.
At least 6-10 to anylize
Anymore its All Bench Racing Bullshit To Me.
Show me Timeslips.
The 8 foot Gold plated Trophy.
Your Face & Race car on Car Craft & Hotrod Magazine.

See ????? !!!!!!
 
I agree with you. Magazine hype I don't believe with its a product they got from a company with three full page ads in there magazine and a pop up banner on there page. I hear ya I did allot of searching around and talking to people. I get lunati there ok. Crower and Isky are favorites. Stay away from comp they are the worst. This is by people that race I am from a racing town the 1/2 mile oval and drag strip was 15 min from my house as a kid. Now a half hour away. I talked to gentleman who designed the ecu he favored Crower.
 
Strictly Attitude said:
I agree with you. Magazine hype I don't believe with its a product they got from a company with three full page ads in there magazine and a pop up banner on there page. I hear ya I did allot of searching around and talking to people. I get lunati there ok. Crower and Isky are favorites. Stay away from comp they are the worst. This is by people that race I am from a racing town the 1/2 mile oval and drag strip was 15 min from my house as a kid. Now a half hour away. I talked to gentleman who designed the ecu he favored Crower.
Click to expand...


Id add ERSON and CRANE to the approved vendor list (BTW crane makes several G.M. cams)Lunati Crower and ISKY all 5 vendors produce good quality cams, and yes I personally avoid comp simply because of the HORRIBLE & INCONSISTENT at times LUDICROUSLY UNINFORMED tech support,
at least its been my experience that if you ask a question about a product from the other 5 vendors you get either a correct answer or if the guys unsure,the guy on the phone, will tell you he will call you back with an answer , you could talk with comps tech support guys 5 times and Id bet get 5 different answers, as a result I have used those other listed five vendors, and most of the time CRANE,CROWER AND ERSON as I find that once I calculate the cam specs I need at least one of those three will have something close to what I,m looking for
 
You must log in or register to reply here.
Back
Top