connecting rod strength h vs I beam
you might want to read thru these links for info also first lets point out how you calculate 4000 Feet Per Minute, in piston speed, which in most chevy v8 engines is a reasonable durability limit in one revolution a piston moves from TDC (top dead center )TO BDC (bottom dead center)and back to...
garage.grumpysperformance.com
some basic bbc math, to get you thinking about your potential dream bbc combos.
I recently had a discussion with one of the local guys concerning what heads and rotating assembly he should buy now that he recently purchased a tall deck (10.2") big block chevy block. he has a perfectly good 427 forged crank (3.76" stroke) but hes seriously thinking of buying a (4.25" stroke)...
garage.grumpysperformance.com
An Option On A Source For Cranks Etc.
just pointing out a few component options A couple local guys suggested using these cranks and rods, I have looked over a few and the quality looks decent, but I have no personal experience, using the components YET. https://www.molnartechnologies.com/...
garage.grumpysperformance.com
types of crankshaft steel
I POSTED THIS BEFORE, when shopping for a rotating assembly , it pays too carefully compare features, read the fine print carefully ,and do some careful pre-purchase research. price is NOT the most important consideration, value per dollar spent, quality and durability would be far higher on my...
garage.grumpysperformance.com