your going to need to refer to the charts below when calculating dynamic compression, the link below has a ton more related info
viewtopic.php?f=52&t=727
https://vdocuments.mx/chevrolet-hydraulic-solid-camshafts.html
https://www.crower.com/valve-timing-chart/
VALVE TIMING CHART
there are quite useful ,cam selection soft ware programs that get you in the ball park, but the final selection is based on far more factors than most of those software programs address
http://www.camquest.com/
viewtopic.php?f=52&t=727
https://vdocuments.mx/chevrolet-hydraulic-solid-camshafts.html
https://www.crower.com/valve-timing-chart/
VALVE TIMING CHART
there are quite useful ,cam selection soft ware programs that get you in the ball park, but the final selection is based on far more factors than most of those software programs address
http://www.camquest.com/
Last edited by a moderator: