Kevin Blank
Member
I need some advice. I replaced my 6 Body Mount Bushings on my 80 Camaro. I messed up the last Bushing by not aligning it correctly and stripped the Body Mount Nut. Its location is the Left side below the drivers seat.
Can I use a Steel Taper Hand Tap to create new Threads in the Nut?
Or maybe insert a Helicoil into the Nut?
Or any other advice to fix my problem? (FYI – I don’t have a welder or don’t have access to anyone who welds).
Thanks for the Help!
Kevin
Can I use a Steel Taper Hand Tap to create new Threads in the Nut?
Or maybe insert a Helicoil into the Nut?
Or any other advice to fix my problem? (FYI – I don’t have a welder or don’t have access to anyone who welds).
Thanks for the Help!
Kevin