I got a 1987 chevy truck 4x4.Im gonna put a 0010 block in it. Pretty stock bottom end and bored 0.040 over. Gonna put vortec heads on it with ls6 springs and 787-16 retainers. Gonna have better 9.45-1 to 9.55-1 compression.Ots got a weland street warrior intake on it. whats the best cam to get a good sound and have good torque and power with a 700r4 transmission for a 4x4.
are you looking for a hydraulic roller or flat tappet cam? why not call several manufacturers
discuss what you have currently, what you want to accomplish and related costs, options etc.
after discussions average the suggested results they suggested in component upgrades,
, combine the related info and make a more informed decision
Crower 619.661.6477
Camshafts | Aftermarket High Performance Cams | Racing Cams
Crower's high performance aftermarket camshafts for international and domestic automobiles, diesels, boats, tractors, motorcycles, and trucks. Crower leads the market by making high quality products at affordable price.
www.crower.com
erson 800-641-7920
http://www.pbm-erson.com/UserFiles/Documents/Catalogs/2013 erson catalog.pdf
lunati..662-892-1500
Camshafts & Kits - Products - Lunati®, LLC.
With over 5 decades of performance experience, Lunati Power embodies horsepower with an attitude. All Lunati products are built by racers for racers, right here in the USA. Independently owned, experienced tech support and modern technology are just a few things to expect when shopping Lunati Power.
www.lunatipower.com
ISKY 323.770.0930
clay smith 714-523-0530
herbert cams 714-491 -2267
related threads
is a roller cam worth the extra cost vs a flat tappet design
heres some info from COMP CAMS " Flat Tappet vs. Roller Tappet Lifters theres far more than just the cam and lifters required to swap types of cams, if your engines currently equipped with a flat tappet cam your almost sure to need a new timing chain set cam button new push rods obviously a new...
garage.grumpysperformance.com
MACHINING VORTEC HEADS, and OTHER HEADS
LOOK THRU THE LINKED INFO ITS WORTH THE TIME AND EFFORT keep in mind vortec heads without push rod guide plates or press-in rocker studs used with the push-rods MUST use self aligning rockers, standard rockers used without push rod guide plates will not maintain proper alignment and only screw...
garage.grumpysperformance.com
degree it in correctly and get it to last,cam install info,
IM frequently asked (why bother degreeing in a cam, the timing set comes with index marks to install it?) it basically comes down to, a question of do you accept a random install where the timing can be almost any place randomly or do you insist on maximizing the engines potential and know...
garage.grumpysperformance.com
semi fool proof cam sellection
you can start with this, the SIX cam manufacturers POSTED OR LINKED BELOW that have proven to be dependable, the soft ware below might prove useful, so use it to get a base line INFO YOU NEED IF YOUR selecting the correct cam for YOUR combo FIRST!!>>>>>>ANY AND ALL CAM MANUFACTURERS WILL need...
garage.grumpysperformance.com
valve train clearances and problems
you might want to read thru these links and sub links it will help you avoid costly mistakes http://www.summitracing.com/parts/pro-66830/overview/ https://www.harborfreight.com/multipositional-magnetic-base-with-fine-adjustment-5645.html...
garage.grumpysperformance.com
sellecting valve springs, and setting up the valve train
How do you determine the spring pressure needed to keep the valves under control for a given lift, duration, and max rpm. It might take you several hours to read thru all the links and sub links but its time very well spent as it could save your engine from destruction and save you thousands of...
garage.grumpysperformance.com
is it peak hp numbers or a good street combo your after?
OK you've decided you can,t live without a killer 383 sbc, you need to select the parts and you want to build an engine you can be proud of, the first question is whats your budget look like, quickly followed by what will you be using the engine for, and do you have the drive train to match...
garage.grumpysperformance.com
Thoughts On Rebuilding A 350 As A First Engine
Hello, so I will be picking up a 350 later today from a fb market place deal. $200 complete engine. I'd like to rebuild it back to stock/semi stock It's going to go in my truck. So I'm looking for more of a reliability factor vs a track engine. What can I re use from my engine, and what should...
garage.grumpysperformance.com