(just dreaming about the potential engine build if price was only a minimal concern)
the idea here is to build a pump gas friendly BBC that would very easily exceed 750hp/800 ft lbs that you could drive on the street using high test gas
my goal would be very high dependability and massive torque, in the 3500rpm-6000 rpm range, hp would be no real issue as I have no intention to race the car
Id have a 4l80E trans modified fo full manual shift control and a 3000 rpm stall converter and a dana 60 rear differential with 354:1 rear gears
heads
https://www.jegs.com/i/AFR-Airflow-Research/033/2001/10002/-1
heads
ID build something rather similar to this 598 BBC short block
https://www.shafiroff.com/chevy-pump-gas-short-block/598-talldeck-short-block-street.php
a mild hydraulic roller cam similar to this (remember its for street performance not racing)
http://www.pbm-erson.com/Catalog/Erson/Camshafts/Hydraulic Roller_E/ERSE120831
a set of 8 66lb fuel injectors
https://www.eastwood.com/holley-83-...8MPsDqsBhcwhvkZ17y4bAU017q_Y12D8aAlUWEALw_wcB
intake similar to this
https://www.holley.com/products/int...FslCFgOjxWl3ttEwzmfELfiMLJNWbZvMaApOCEALw_wcB
throttle body
https://www.holley.com/products/fue...le_bodies/4_bbl_throttle_bodies/parts/112-588
Id want coil on plug per cylinder ignition with an adjustable height collar distributor type control
https://www.chevydiy.com/ignition-systems-guide-big-block-chevy-engines/
https://www.cjponyparts.com/holley-...AlThCT-oKX5Plb4-lqmlWnZtwax4Y5cMaAinzEALw_wcB
https://www.jegs.com/i/MSD+Ignition...yPJ63ox_H5lcJFFTul4tAQlBH3J07DfkaAppzEALw_wcB
the idea here is to build a pump gas friendly BBC that would very easily exceed 750hp/800 ft lbs that you could drive on the street using high test gas
my goal would be very high dependability and massive torque, in the 3500rpm-6000 rpm range, hp would be no real issue as I have no intention to race the car
Id have a 4l80E trans modified fo full manual shift control and a 3000 rpm stall converter and a dana 60 rear differential with 354:1 rear gears
heads
https://www.jegs.com/i/AFR-Airflow-Research/033/2001/10002/-1
heads
ID build something rather similar to this 598 BBC short block
https://www.shafiroff.com/chevy-pump-gas-short-block/598-talldeck-short-block-street.php
a mild hydraulic roller cam similar to this (remember its for street performance not racing)
http://www.pbm-erson.com/Catalog/Erson/Camshafts/Hydraulic Roller_E/ERSE120831
a set of 8 66lb fuel injectors
https://www.eastwood.com/holley-83-...8MPsDqsBhcwhvkZ17y4bAU017q_Y12D8aAlUWEALw_wcB
intake similar to this
https://www.holley.com/products/int...FslCFgOjxWl3ttEwzmfELfiMLJNWbZvMaApOCEALw_wcB
throttle body
https://www.holley.com/products/fue...le_bodies/4_bbl_throttle_bodies/parts/112-588
Id want coil on plug per cylinder ignition with an adjustable height collar distributor type control
https://www.chevydiy.com/ignition-systems-guide-big-block-chevy-engines/
https://www.cjponyparts.com/holley-...AlThCT-oKX5Plb4-lqmlWnZtwax4Y5cMaAinzEALw_wcB
https://www.jegs.com/i/MSD+Ignition...yPJ63ox_H5lcJFFTul4tAQlBH3J07DfkaAppzEALw_wcB
Last edited: