JimmyDuncan
Well-Known Member
They do look good value.. do you think the quality is ok?This looks like a Good Deal Jimmy.
I would buy 2 or 3.
Be under $100.
Ask about shipping to New Zealand.
They do look good value.. do you think the quality is ok?This looks like a Good Deal Jimmy.
I would buy 2 or 3.
Be under $100.
Ask about shipping to New Zealand.
I think Ok.They do look good value.. do you think the quality is ok?
I’ll have to open an eBay account and ask about shipping to nz..https://www.ebay.com/itm/3HP-High-T...376505?hash=item2f23fefd79:g:HZAAAOSwFalcfj4R
He sold 16 so far Jimmy looking at the Stats.
I reused the original starter motor mounting bolts that came with my 1999 Chevy Tahoe.I’ve seen a few starters with 10mm mounting holes in my search... some don’t mention it.. I need special bolts with 10mm shank and 3/8 thread then yeah.. which I can’t find in nz... I think the starters for more modern cars that work with 168 tooth can have 10mm holes..?
https://www.ebay.com/itm/KNURLED-GM...261181&hash=item23975a2a71:g:ElUAAOSwi8VZS34QI’ve seen a few starters with 10mm mounting holes in my search... some don’t mention it.. I need special bolts with 10mm shank and 3/8 thread then yeah.. which I can’t find in nz... I think the starters for more modern cars that work with 168 tooth can have 10mm holes..?
https://www.ebay.com/itm/Starter-Bo...862463&hash=item3abdabdc8d:g:UsMAAOSwGohbmE3wI’ve seen a few starters with 10mm mounting holes in my search... some don’t mention it.. I need special bolts with 10mm shank and 3/8 thread then yeah.. which I can’t find in nz... I think the starters for more modern cars that work with 168 tooth can have 10mm holes..?
No not that Grumpy.https://shop.advanceautoparts.com/p...Vi7bACh0xNgX-EAQYAyABEgKh2vD_BwE&gclsrc=aw.ds
you could try this but eventually youll want a new block
Right about SBC blocks.https://shop.advanceautoparts.com/p...Vi7bACh0xNgX-EAQYAyABEgKh2vD_BwE&gclsrc=aw.ds
you could try this but eventually youll want a new block
https://shop.advanceautoparts.com/p...Vi7bACh0xNgX-EAQYAyABEgKh2vD_BwE&gclsrc=aw.ds
you could try this but eventually youll want a new block
https://www.summitracing.com/parts/mor-35500/
This Jimmy.
Buy 2 bottles of Moroso Ceramic block sealer.
So, you think would it be likely to happen again with another block if I don’t use a motor plate..?It's a stress riser crack Jimmy.
From Engine torque reaction.
Car is so heavy.
Needs a Drag Race Front Motor plate locked solid to frame.
Competition Engineering makes them nice.
When Ready Dart Little M Block only.
I’d love to go to a BBC, but that’s a whole bigger stack of $$$$... then my trans and drive shaft might decide the stress is too much..Right about SBC blocks.
BBC. Ponch. Olds 425