looks like the bracket being moved to under the carb spacer rather than over the carb spacer would also help line it up
busterrm said:Hey Rick, where is the tranny dipstick in relationship to the body of the t bucket? Just a thought, can you route it into the floor of the body and mount bolt it to the floor board, or maybe the firewall inside? Just curious, that would make it easier to check the fluid.
I agree with that Dorian! The temp your wanting to know is the higher temp, telling you if your tranny is getting too hot. In the pan makes me think that the fluid would be cooler.DorianL said:Chief, I plumbed my temp sensor in the pan as well and find it to read kinda low - I am planning on relocating the temp sensor to the line going to the radiator. I think it will more accurately reflect the oil temp inside the trans...
D.
Maybe route it through the floorboard and then through the firewall into the engine compartment. Just brainstorming here!Indycars said:busterrm said:Hey Rick, where is the tranny dipstick in relationship to the body of the t bucket? Just a thought, can you route it into the floor of the body and mount bolt it to the floor board, or maybe the firewall inside? Just curious, that would make it easier to check the fluid.
Not sure I want a passage for hot transmission fluid to get inside the car. I never
had that much trouble getting to it before when it was under the car. Not
something that had to be check all the time.
On the other hand it would be nice to check it like a normal human.