Speedlink1973
Well-Known Member
Have new ATI damper installed torque to 85 ft lbs
With a dash of blue loctite.
Had to impervious a bit on lower pulley,
I noticed damper I.D. was .042 bigger then the flange O.D. of pulley so I used aluminum tape
Cut some real long thin strips wrapped it
To get it around. 005 so pulley didn't look like a clown car wheel, or professional term bringing Runout in. Or bringing in
concentricity.
With a dash of blue loctite.
Had to impervious a bit on lower pulley,
I noticed damper I.D. was .042 bigger then the flange O.D. of pulley so I used aluminum tape
Cut some real long thin strips wrapped it
To get it around. 005 so pulley didn't look like a clown car wheel, or professional term bringing Runout in. Or bringing in
concentricity.
Attachments
Last edited by a moderator: